DECKT-6Z PA CONTROL PANEL
[9000510]
DECKT-6Z PA CONTROL PANEL
DECKT-6Z PA CONTROL PANEL
\u0091Enable\u0092 Push Button:
• When two PA-6Z panels are connected to the DT-120/240 system, pressing.
• \u0091Enable\u0092 transfers power & control to the \u0091enabled\u0092 panel.
• The panel is in control when the ENABLE switches lamp is on.
• Note: Only one PA-6Z panel can control the PA amp at one time.
Individual Zone Selection:
• Switches labeled 1-6, control the selection of the 6 speaker zones on the PA Amplifier.
• Selected zones are indicated when the switches lamp is lit.
• Custom labels are inserted under each push button to indicate the general location of each zone.
All Zone Selection:
• Pushing the switch labeled \u0091ALL\u0092, enables all 6 speaker zones on the PA Amplifier simultaneously.
Microphone:
• Only the Decktalk supplied Hand-microphone should be used.
• For dual PA-6Z installations with Talkback interface, only the 2nd PA-6Z panel requires a hand-mic.
• A blanking plug is supplied for when the hand microphone is not in use.
Dimming control:
• Adjusts the brightness of each of the push buttons lamps when enabled.
• Turn clockwise to increases brightness, and anti-clockwise to decrease.
Termination Hardware:
• Fitted with 12 industrial type \u0091push-in\u0092 terminals.
• Ensure care is taken not to damage panel while mounting & terminating.
• 12 Core 0.75mm2 Screen cable (Yard supplied) is required to connect to the DT-120/240.
Manufacturer: TMQ Electronics