AMP:12V 5CH 4x4ohm/65W+1x4ohm/200W IP64
[1330830]
Ask a Question Or Request a Quote?
AMP:12V 5CH 4x4ohm/65W+1x4ohm/200W IP64
Request Quote
Request further information
Phone
Email
Request For Alternative Product
AMP:12V 5CH 4x4ohm/65W+1x4ohm/200W IP64
Phone
Email
HCP 5MD marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation \u201cwings\u201d along the side of the amplifier.
Channel mode | Output Power (RMS) @ 14.4 VDC |
Filters | Distortion - THD (100Hz @ 4Ω) |
S/N Ratio (A weighted @ 1V) |
Damping factor (100Hz @ 4Ω) |
Size W x D x H mm(in.) |
---|---|---|---|---|---|---|
5 - 3 |
5 Ch: 65 W x 4 + 200 W x 1 (4 Ω) 5 Ch: 105 W x 4 + 330 W x 1 (2 Ω) 3 Ch: 210 W x 2 (4 Ω) + 200 W x 1 (4 Ω) 3 Ch: 210 W x 2 (4 Ω) + 330 W x 1 (2 Ω) |
FRONT Ch. filters FULL: Yes Hi-Pass: 50 - 5k Hz @ 12 dB/Oct. REAR Ch. filters FULL: Yes Hi-Pass: 50 - 5k Hz @ 12 dB/Oct. Band-Pass: 50 - 500 Hz (Hi) @ 12 dB/Oct. 50 - 5 kHz (Lo) @ 12 dB/Oct. SUB Ch. filter LO-PASS: 50 - 500 Hz @ 24 dB/Oct. SUBSONIC (on/off): 25 Hz @ 24 dB/Oct. BOOST 50 Hz (adjust): (0 - 12) dB Remote Volume Control: (-50 - 6) dB |
0.02 % | 100 dB | 100 | 345 x 190 x 50 / 13.58 x 7.48 x 1.97 |
Manufacturer: