HRO Seafari Versatile

Main Features

Available in compact or modular configuration that allows flexibility for those who have space restrictions
Space efficient design (5 inches smaller than the original Seafari SFC).
No installation restrictions. Access membranes from both sides for easy maintenance and installation options.

Extremely quiet, smooth, and with complete vibration isolation.
Both compact and modular configurations allow remote access to system controls.
Micro Processor Controlled Electronics provide state of the art technology and reliability with weekly Automatic Fresh Water Flush Timing (optional)

Remote Mount Cube - for easy access to system controls.
Equiped with a failsafe Product Water Diversion Valve allows only safe drinking water to enter storage tanks.
High rejection, high yield, commercial grade, and chemical resistant Membranes.

Product Water Produced per hour of operation: +-15% 850 psi / 56 Bar, 77oF / 25oC & 35,000 ppm TDS typical sea water
Salt Rejection (Chloride Ion): Minimum 99.2%, Average 99.4%
Product Water Temperature: Ambient to feed water temperature.
Salinity Monitoring: The salinity monitoring components of the system give a continuous readout in micromhos per cubic centimeter, are temperature compensated, and of a fail safe design.
Salinity Range: Designed for seawater use up to 50,000 ppm TDS (Nacl) (typical seawater salinity is 35,000 ppm.)
Temperature Range: Min. 33oF / .5oC Max. 122oF / 50oC
System Feed Water: Flow: 50Hz, 3.5 gpm / 13.2 lpm; 60Hz, 3 - 4.2 gpm / 11.4 - 15.9 lpm
Reverse Osmosis Membrane: High Rejection/High Yield aromatic tri-polyamind, thin film composite, spiral wound, single pass reverse osmosis membrane element.
Chlorine Tolerance: 0.1 ppm
pH Range: 3-11 (typical seawater pH is 8)
System Pressure:
Feed Water
Minimum: 6 psi / .41 bar / .42 Kg/cm2
Maximum: 35 psi / 2.41 bar / 2.46 Kg/cm2
System Operation
Seawater @ 35,000 ppm & 77° F / 25° C
Nominal: 850 psi / 56.5 bar / 57.66 Kg/cm2. (Brackish varies w/ppm)
External Installation Water Connections: Pipe sizes supplied by the installer for connection of Horizon Reverse Osmosis supplied components.
Feed Inlet: 3/4" MNPT (Male National Pipe Thread, Amer. Std)
Brine Discharge: 1/2" FNPT (Male National Pipe Thread, Amer. Std)
Product: 3/8" FNPT (Female National Pipe Thread, Amer. Std)

Model	Production/HR	Production/24HRS	Weight
SFC 450-1	19 Gal / 71 Lit	450 Gal / 1,703 Lit	118 lbs / 54 kg
SFC 700-1	29 Gal / 110 Lit	700 Gal / 2,650 Lit	125 lbs / 57 kg
SFC 900-1	38 Gal / 142 Lit	900 Gal / 3,407 Lit	136 lbs / 62 kg
SFC 900-2	38 Gal / 142 Lit	900 Gal / 3,407 Lit	136 lbs / 62 kg
SFC 1400-2	58 Gal / 221 Lit	1400 Gal / 5,300 Lit	147 lbs / 67 kg
SFC 1800-2	75 Gal / 284 Lit	1800 Gal / 6,814 Lit	150 lbs / 68 kg

PHASE	HZ	VOLTAGE	HP	RUNNING AMPS	START UP AMPS
1	50/60	115	2.5	30	103
1	50/60	220	2.5	15	52
3	50/60	220	3	12	30
3	50/60	440	3	6	15

Self Contained (Front View)

Self Contained (Profile View) & Booster Pump

Modular Membrane Assembly

Modular Control Panel and Gauges

Versatile Pumps