CP-E CONTROL PANEL E WITH STANDARD CABLE
Zipwake’s stylish control panel is carefully designed to be user-friendly and intuitive to allow the helmsman to focus on the right thing – enjoying the boat ride!
You are in charge with Zipwake Series E Control Panel
The panel’s two unique control wheels provide easy, quick and intuitive manual control of running trim, heel or heading. However, the system normally operates in automatic control mode, which is enabled by a single press on the AUTO button. In this mode, the built-in high-frequency GPS, 3D gyro sensors and robust motion controller automatically ensure dynamic elimination of un- comfortable and dangerous boat pitch and roll.
Push the AUTO BUTTON – and GO!
The system provides continuous feedback of boat speed, turning radius, pitch and roll angle, as well as the interceptors’ positions, on a 2.8” sunlight- readable wide viewing color display.
The panel’s waterproof design withstands harsh marine conditions in open boats or on a flybridge. The sockets for connecting peripherals are located on the rear of the panel. In addition to connectors for the system’s distribution unit and multiple control panels, external GPS and NMEA 2000 equipment can be connected. The system can also be connected to the ignition key for automatic system power-on. A waterproof cap conceals the USB interface that allows for future software upgrades and ensures that the Zipwake Dynamic Trim Control System is future-proof.
Features
- Fully automatic - Dynamic pitch and roll control - Steering and turn enhancement
- Built-in GPS and motion sensors
- Unique and intuitive 3D controls
- Sunlight readable color display
- Instant state user feedback
- Auto power on/off via ignition key sense
- Full range of electrical interfaces
- Waterproof
- Auto dimming / night mode
- Upgradable via USB stick
- Supports up to 3 additional Control Panels in the system
- Surface, flush or gimbal bracket mount
- Manages installation configurations from 1 to 6 Series E dual-servo interceptors or any mix with single-servo interceptors
- Allows configuration of interceptor pair function
- Auto Cleaning - Selectable periodic cleaning cycle - Prevents fouling inside the interceptor
- Monitored and/or controlled from external devices, e.g. multifunction displays or plotters via its NMEA 2000 interface
Brochures
2012111-zipwake_series_e_installation_guide_en-r2a.pdf
2012131-zipwake_series_e_operators_manual_en-r2a.pdf
2011302-2012104-zipwake_series_e_operators_quick_guide_en-r1a_web.pdf-r1a_a4.pdf
1010157-zipwake_series_e_product_specification-r3c.pdf
1010134-outline_of_operating_principles_behind_the_automatic_motion_control_features_en-r1a.pdf
2012105-zipwake_series_e_operators_startup_checklist_en-r1a_web.pdf
| Codes | |
|---|---|
| Manufacturer: | Zipwake |
| Supplier Code: | 2012032 |